Safe Deposit Locker Cabinet


Material The lockers are manufactured as per IS: 5244. The two sides, back, top and bottom of the locker cabinet are fabricated from tested quality 5 mm thick M.S. plate. The partitions and the shelves are of 2.5 mm HR prime quality steel sheet. The door plate of each locker is 10 mm M.S. plate. The hinge arrangement, such that it is provide sufficient resistant against tempering attack of common hand tools. The shelves of the locker are reinforced at the front with the 50 X 10 mm bright solid flats.

Lock Each locker is fitted with high quality first class unpickable dual control 7 leave key lock. These locks are selflocking so that the custodian does not have to re-lock the locker with his key after the customer has locked it. The mechanism of the lock is such that the customer shall not be able to withdraw his key unless the locker has been re-locked fully. Once the customer has locked the locker, the same cannot be opened unless the custodian turns in his key to take off his control. We can also provide personal lock known as renter lock from inside for total protection and customer retains the key. Over all pad locking system can also be provided so that customer can use their own padlock for more confidence.

Size The size and dimension of locker made as per IS: 5244. In addition to, also manufacturers safe deposit lockers as per the customer choice and specification for the best and economical use of available space.

Technical Specification : (Click on Image for Enlarged View)
  2007-2008 | Privacy Policy | Terms & Condition | Powered By : Param Software